Ariens 90203200 Owner's Manual download pdf (Page 5)

UNPACK CARTON & INSTALL HANDLE

(See Fig. 2)

CAUTION: Be careful of exposed

sta ples when handling or disposing

of cartoning material.

IMPORTANT: WHEN UNPACKING AND AS SEM BLING

TILLER, BE CAREFUL NOT TO STRETCH OR KINK

CABLE(S).

• Cut cable ties securing handles.

• Slowly lift handle as sem bly up, route cable(s) as shown

and align han dle holes with handle panel hole and

slot.

• Loosely assemble hardware as shown. the

shorter (1" long) hex bolt is assembled in lower hole of

handle. Repeat for opposite side. Tight en all hard-

ware se cure ly.

• Cut cable ties securing tiller to skid and remove tiller

from skid.

• Remove screws securing depth stake to skid and dis-

card the screws.

dep

th_st

ake_4

DEPTH

STAKE

SUPPORT

BOLT

HEX BOLTS,

LOCK WASH ERS,

AND HEX NUTS

DEPTH STAKE

SUPPORT

NUT “A”

ENGINE BRACK ET

HALVES

Fig. 3

STAKE

SPRING

Fig. 2

ASSEMBLY

HANDLE HEIGHT

• Handle height may be adjusted to better suit operator.

(See “HANDLE HEIGHT” in the Service and Ad just-

ments section of this manual.)

TILLING WIDTH

• Tilling width may be adjusted to better handle your

tilling con di tions (See “TINE ARRANGEMENT” in the

Service and Adjustments section of this manual.)

TINE OPERATION

• Check tine operation before first use. (See “TINE

OPERATION CHECK” in the Service and Adjustments

section of this manual.)

INSTALL DEPTH STAKE AS SEM BLY

(See Fig. 3)

• Loosen nut “A”.

• Insert stake support between engine brack et halves

with stake spring down.

• Bolt stake support to engine brackets with bolts, lock

washers and nuts. Tight en se curely. Tighten nut “A”.

• Depth stake must move freely. If it does not, loosen

support bolt.

TILLER

HANDLES

020

CABLE(S)

&4(ANDLEª0ANEL?

FLAT

WASHER

HEX BOLT

5/16-18X1"

TILLER

HANDLE

HAN DLE

PANEL

NUT

LOCK

WASH ER

HEX BOLT

5/16-18X1-1/4"

HANDLE

PANEL

BOLTS

1 2 3 4 5 6 7 8 9 10 ... 63 64

Comments to this Manuals

No comments

Ariens 90203200 Owner's Manual Page 5

Comments to this Manuals

Related products and manuals for Grass trimmers Ariens 90203200