Ariens 911214 Pro21XD User Manual download pdf (Page 9)

GB - 9

3. Install the drive cover with three hex

bolts and lock washers. Make sure the

plate does not pinch any cables.

4. Connect the engine/blade control cable

to the engine.

Route the z-bend cable end into engine

shutoff lever as shown below.

Insert the cable connector into the cable

mounting bracket on the engine. Make

sure the connector snaps into place

securely.

5. Fill engine crankcase with oil. See

engine manual.

6. Set-up mower for bagging, side

discharge or mulching. See MOWER

SET-UP on page 14.

7. Fill fuel tank. See FILLING THE FUEL

TANK on page 14.

8. Connect spark plug wire.

9. Check the engine/blade control feature.

Try starting the engine without the

engine/blade control held against the

handlebar. Engine must not start. If

engine starts, stop engine and bring the

unit to your dealer for adjustment or

repair.

Figure 5

1. Drive Cover

2. Mounting Hardware

2

2

1

Figure 6

Kawasaki Engines

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 27 28

Comments to this Manuals

No comments