Ariens 513-517 User Manual download pdf (Page 43)

10 - 43

10.1 INTRODUCTION

NOTE:

Rear wheels must be removed to perform

repairs in this section. Block up rear of mower to raise

rear wheels off work surface. Remove snap ring secur-

ing wheel to axle and remove washer and wheel.

10.2 TRANSMISSION REPLACEMENT

The 3-speed transmission is not repairable. It should

be replaced if internal problems develop. To remove

the transmission, remove the drive wheels and pinions.

Slide the axles out.

1. Remove wheel cover and axle nut to remove wheel

and inner cover.

2. Remove drive pinion and axle bearing by removing

the two retaining E-clips.

3. Repeat steps 1 and 2 for the other rear wheel.

4. Disconnect the gearshift cable.

5. Unbolt the transmission from the left hand

quadrant.

6. Remove drive belt from pulley.

7. Slide the transmission/axle assembly to the right

and then down to remove.

8. Install replacement in reverse order. Use pulley

and shift linkage from removed unit.

SECTION 10 - GEAR DRIVE SYSTEM & AXLE

WARNING:

Remove wire from spark plug

before attempting any repair or adjustment

procedures.

WARNING:

Gasoline is highly flammable and

its vapors are explosive. Handle with care.

CAUTION:

DO NOT touch engine or parts

which are hot from operation. Allow such

parts to cool before servicing unit.

1. Transmission-Tuff Torque

2. Left Hand Rear Quadrant

3. Ball Bearing

4. Ratchet Pinion

5. Wheel Inner Cover

Figure 32

1 2 ... 38 39 40 41 42 43 44

Comments to this Manuals

No comments

Ariens 513-517 User Manual Page 43

Comments to this Manuals

Related products and manuals for Gardening equipment Ariens 513-517