Ariens 513-517 User Manual download pdf (Page 26)

4 - 26

4.12 FRICTION WHEEL ADJUSTMENT

Early Models (Side Pull)

Adjust rear cutting height levers to middle position.

Check to be sure there is slack in the friction wheel

drive cable, if not readjust cable nuts.

Set speed selector at slowest speed and loosen the

two cap screws on drive mount. Hold lever securing

drive cable down toward mower pan and adjust drive

assembly to bring friction wheel to within 1/16" above

drive disk. Tighten cap screws. Check for proper

function of friction wheel and speed selector. Adjust

cable nuts to remove slack.

Figure 12

1. Lock Nut

2. Helical Spring

Lockwashers

3. Speed Control Bell

Crank

4. Speed Selector Rod

5. Hair Pin

6. Swivel

OM0300

Figure 13

1. Cable Nuts

2. Drive Mount

3. Adjustment Screws

4. Drive Disk

5. Friction Wheel

6. Battery

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 43 44

No comments

Ariens 513-517 User Manual Page 26