Ariens Platinum 30 Specifications download pdf (Page 34)

EN - 34

TRACK TENSION ADJUSTMENT

(921023)

(Figures 42 and 43)

Check the track tension by applying pressure

on the track midway between the upper and

rear track rollers. Deflection should be

approximately 3/8" (9.6 mm) (Figure 42).

If deflection is excessive, tighten the track

tension.

If unit pulls to the left or right when a straight

path is desired adjust the track tension. If the

unit is pulling to the left, tighten the left track

adjuster. If the unit is pulling to the right,

tighten the right track adjuster.

To adjust (Figure 43):

1. Tighten the adjuster nut to tighten the

track tension.

Loosen the adjuster nut to reduce track

tension.

2. Check that unit tracks straight with no

pulling to either side.

HEIGHT ADJUSTER CABLE

ADJUSTMENT (921023)

(Figure 44)

1. Make sure that height adjustment lock

finger is fully engaged (Figure 44).

2. Loosen jam nuts on cable mount

bracket.

3. Adjust the jam nuts to remove all cable

slack and bring the overtravel arm into

slight contact with the right end of the

slot in the height adjuster lock finger.

4. Tighten the jam nuts.

Figure 41

1. Hex Shaft

2. Bearing Flange

3. Speed Selector Arm

4. Friction Disc

5. Spring Clip

6. Drive Plate Assembly

7. Drive Sprocket

Figure 42

3/8"

(9.6 mm)

Figure 43

Track

Adjusters

OS7228

Figure 44

OS7229

1. Height Adjuster Lock Finger

2. Overtravel Arm

3. Height Adjuster Cable

4. Jam Nuts

Before adjusting ensure

that height adjuster lock

finger is fully engaged.

Pin on overtravel arm

makes slight contact

with end of slot.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 40 41 42

Comments to this Manuals

No comments

Ariens Platinum 30 Specifications Page 34

Comments to this Manuals

Related products and manuals for Garden tools Ariens Platinum 30