Ariens Platinum 30 Specifications download pdf (Page 11)

EN - 11

Install Discharge Chute and

Discharge Chute Crank (921023, 024,

030, 032, 035)

(Figures 10 and 11)

1. Grease underside of discharge chute

ring (if not already greased).

2. Remove mounting hardware from auger

housing (Figure 10).

3. Install discharge chute over opening in

the auger housing. Finger tighten the

mounting hardware removed in step 2.

NOTICE: Leave discharge chute pedestal

loose to help install the chute crank.

4. Insert the short end of the chute crank

into the hole in the front of the control

panel.

NOTICE: Be careful not to damage nylon

bushing when attaching crank to the control

panel.

5. Connect the chute crank to the pinion

gear on chute with hairpin.

.

6. Orient the chute and pedestal to its most

vertical position and tighten pedestal

hardware to 15 – 31 lbf-ft (20 – 42 N•m)

(Figure 10).

Install Discharge Chute, Chute

Control and Chute Rod (921028, 029)

(Figures 12, 13 and 14)

1. Grease underside of discharge chute

ring (if not already greased).

2. Remove mounting hardware from auger

housing.

3. Install discharge chute over opening in

the auger housing. Finger tighten the

mounting hardware removed in step 2.

NOTICE: Leave discharge chute pedestal

loose to help install the chute rod.

Figure 10

1. Mounting Holes

2. Discharge Chute

3. Chute Pedestal

4. Discharge Chute Ring

5. Mounting Hardware

1

OS7040

OS7045

5

3

2

4

Figure 11

1. Chute Crank

2. Control Panel

3. Hairpin

1

3

2

921023, 024, 030, 032, 035

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 41 42

Comments to this Manuals

No comments