Ariens Hydro Pro 36 Operator's Manual download pdf (Page 8)

Step Five: Install Remote

Deflector Control Cable

1. Connect the barrel cable end to the chute deflector cable anchor

before clipping the cable to the discharge chute cable bracket.

2. Route deflector remote cable along the left side of the chute

pedestal.

3. Insert the barrel on the cable end into the bracket on left side of

chute deflector.

4. Hold seal out of the way while routing the cable through the bracket

on the left side of the discharge chute, and then push the cable

fitting into the bracket.

5. Push the seal securely over the end on the cable fitting to prevent

water from entering the cable.

6. Check deflector travel. Adjust nut on cable end under handlebar to

obtain full travel, if necessary (see Remote Deflector Control in

Owners Manual.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 25 26

No comments

Ariens Hydro Pro 36 Operator's Manual Page 8