Ariens 927069-14532 Specifications download pdf (Page 14)

GB - 14

IMPORTANT: Proper maintenance can

prolong the life of unit. The following chart

shows the recommended service schedule.

Refer to the maintenance instructions in the

Engine Manual for additional information.

IMPORTANT: Do not place unit on end.

MAINTENANCE SCHEDULE

WARNING: AVOID INJURY. Read

and understand the entire Safety

section before proceeding.

Interval Task Action

Each Use

Check Safety

Interlock System

WARNING: Safety interlock system failure and

improper operation of unit can result in death or

serious injury. Test this system each time the unit

is operated. If this system does not function as

described, do not operate until repairs are made

(see Safety Interlock System on page 10).

Check Parking

Brake

Engage parking brake and engage transmission bypass

lever (see MOVING THE UNIT MANUALY on page 12).

Push unit. If unit rolls, contact your Ariens Dealer.

Clean Unit Clean engine, battery, seat, mower deck, etc. of all dirt and

debris. Do not use solvents, hard cleaners, or abrasives.

NOTE: Protect painted surfaces with automotive type wax.

IMPORTANT: The electric clutch MUST be cool prior to

cleaning mower deck with water.

Check Tires See SPECIFICATIONS on page 24 for correct tire

pressure.

Check Mower

Blade

Check for a worn or damaged mower blade (see

SHARPENING MOWER BLADE on page 18).

Follow Engine

Manual

Maintenance

Schedule

Perform scheduled engine maintenance. Refer to Engine

Manual for detailed instructions.

25 Hours

or Every

Season

Check Battery Keep battery and battery terminals clean (see Cleaning

Battery and Battery Cables on page 19).

Lubricate Unit Apply grease to two front

wheel zerks, steering

gear, and pinion.

50 Hours

or Every

Season

Check Fasteners Check mower blade mounting hardware and all other

fasteners. Replace fasteners that are missing or damaged.

Tighten all nuts and bolts to the correct torque value.

100 Hours

or Every

Season

Check All Belts Replace worn or deteriorated belts.

• Check hydrostatic belt (see HYDROSTATIC BELT

REPLACEMENT on page 20 for hydrostatic belt

location).

• Check PTO belt (see PTO BELT REPLACEMENT on

page 21 for PTO belt location).

Zerk

Steering

Gear and

Pinion

Zerk

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 25 26

Comments to this Manuals

No comments

Ariens 927069-14532 Specifications Page 14

Comments to this Manuals

Related products and manuals for Garden tools Ariens 927069-14532