Ariens 927069-14532 Specifications download pdf (Page 12)

GB - 12

3. Turn ignition key to start position and

release once engine has started.

4. After engine starts, set throttle lever to

fast position.

IMPORTANT: Let engine warm up several

seconds to several minutes depending on

outside temperature.

NOTE: When engine is running, PTO belt is

turning electric clutch on mower deck. The

electric clutch WILL NOT engage mower

blades until PTO switch is engaged.

Shutting Off Engine

1. Stop unit.

2. Disengage PTO.

3. Set throttle lever to slow.

4. Set parking brake.

5. Turn ignition switch to off position and

remove ignition key.

OPERATING MOWER

1. Start engine.

2. Set throttle lever fast.

3. Engage PTO to start mower blades.

4. Use forward and reverse pedal to move

unit.

NOTE: To re-engage PTO (mower blade)

after traveling in reverse, place the unit in

nuetral or start moving the unit forward. Then,

pull up on the PTO switch to engage the PTO

(mower blade).

5. Disengage PTO to stop mower blades.

MOVING THE UNIT MANUALY

Disengage transmission bypass lever (1) to

drive unit and engage transmission bypass

lever (2) to push unit manually (figure 5).

WARNING: If the unit is moved into

reverse with the PTO (mower blade)

engaged, the PTO (mower blade)

MUST shut off. If this system does

not function as described, do not

operate unit until repairs are made.

WARNING: DO NOT disengage or

bypass transmission and coast

downhill.

05305700A

OA0150

Figure 5

1

1. Transmission Bypass Lever Disengaged

2. Transmission Bypass Lever Engaged

2

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 25 26

Comments to this Manuals

No comments