Ariens 22-Ton Log Splitter Specifications download pdf (Page 26)

c. Hold the control lever, extending the

splitting wedge, until the log is split or

the cylinder rod stops at its maximum

travel position. Stop the log splitter

(forward movement), at any point in

the splitting process, if you feel an

unsafe log splitting condition is occur-

ring. As the log is being split, DO NOT

reach forward and attempt to catch the

split wood — let it fall to the ground.

d. Once the wedge reaches its full for-

ward travel, pull back on the control

lever to the full retract position. The

ram of the cylinder will automatically

retract into the cylinder. It is not nec-

essary to hold the control lever as the

cylinder retracts. Stop the wedge if the

log sticks (see caution below). When

the cylinder is fully retracted, the con-

trol valve will automatically shift to a

neutral position.

e. DO NOT load another log or remove

split pieces until the wedge has com-

pletely stopped and the control handle

automatically returns to the neutral

position.

Depending on the type of wood

being split, a log may not always

break into two pieces and fall to

the ground. If a log sticks to the wedge,

place the valve handle in the neutral posi-

tion (stop the wedge from retracting) and

carefully remove the log from the wedge.

Allowing the log to remain attached to the

wedge when it is fully retracted could lead

to possible injury and/or damage to the log

splitter.

CAUTION

Iron & Oak 24 815-672-8596

Operation

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 51 52

Comments to this Manuals

No comments