Ariens 22-Ton Log Splitter Specifications download pdf (Page 18)

14. Coat the threads of the fitting with a

hydraulic pipe sealant and attach the

high-pressure hose from the bottom

valve fitting to the pump, as shown.

Securely tighten the hose fitting.

15. Remove the oil filter from the plastic

cover and apply a thin coat of oil to the

rubber seal. Screw the filter onto the fil-

ter head, located near the hydraulic tank.

Once the filter makes contact with the fil-

ter head, turn it an additional 3/4 turn.

Hand-tighten only.

16. Bolt the fenders onto the fender brackets

using two 5/16-18 x 3/4 inch long hex

head bolts and locknuts. The fenders are

interchangeable (left or right). Position

the fender over the tire with equal spac-

ing in the front and back.

17. The log splitter is now completely assem-

bled. Follow the “Start-Up Procedure”

in the following section, which adds

oil to the engine and hydraulic tank

before trying to start the engine.

Iron & Oak 16 815-672-8596

Assembly Instructions

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 51 52

No comments

Ariens 22-Ton Log Splitter Specifications Page 18