Make sure the rail assembly is standing on
a flat, level area. Have a helper steady the
rail to prevent it from tipping over. The rail
assembly weighs approximately 300
pounds and will cause bodily injury if it
falls on someone.
3. Carefully stand the rail assembly in an
upright, vertical position.
4. Carefully align the hinge brackets in the
base unit with the third hole from the base
plate in the rail assembly.
NOTE: If also installing an optional
BR021180 Log Cradle, assemble it at this
time. The log cradle uses the first and third
holes.
5. Bolt the base unit to the rail assembly
using two 1/2-13 x 1-1/2 inch long hex
head bolts, lockwashers, and nuts, as
shown. Hand tighten the nuts.
Comments to this Manuals