Ariens 306cc Series User Manual Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 31
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
Rev:041310 Copyright © 2010 Liquid Combustion Technology, LLC LCT Engine Service Manual: 208cc, 291cc & 414cc 10
Engine Oil Level Check
Check the engine oil level with the engine stopped and with the engine in a level position.
1. Remove either side mounted  ller cap dipstick or high oil  ll dipstick and wipe it clean.
2. Insert and remove the dipstick without screwing it into the  ller neck. Check the oil level shown on the dipstick.
3. If the oil level is low,  ll to the edge of the oil  ller hole with the recommended oil.
4. Securely screw in the  ller cap/dipstick. Running the engine with a low oil level can cause engine damage.
Always check the engine oil before start up.
Engine Oil Change
Drain the used oil while the engine is warm. Warm oil drains quickly and completely.
Avoid contact with hot oil.
1. Place a suitable container below the engine to catch the used oil then remove the
ller cap/dipstick and the drain plug.
2. Allow the used oil to drain completely, then reinstall the drain plug, and tighten
it securely. Do not over tighten. Dispose of used motor oil in a manner that is
compatible with the environment. We suggest you take used oil in a sealed
container to your local recycling center or service station for reclamation. Do not
throw used oil in the trash, pour it on the ground, or pour down a drain.
3. With the engine in a level position,  ll to the outer edge of the oil  ller hole with the
recommended oil. (see  ll limits right)
• NOTICE
Running the engine with a low oil level can cause engine damage.
4. Securely screw in the  ller cap/dipstick.
Engine Oil
Recommendations
Engine oil affects performance and service life. Use 4-stroke automotive
detergent oil.
SAE 10W-30 is recommended for general use. Other viscosities shown in
the chart may be used when the average temperature in your area warrants.
The SAE oil viscosity and service classi cation are in the API label on the oil
container. The manufacturer recommends you use API SERVICE category
SJ engine oil, or better.
Fill if oil is
below letter
“L” on the
ller cap
Fill if oil
is below
“Add”
on the
dipstick
Max Upper
Level
Max Lower
Level
Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 30 31

Comments to this Manuals

No comments