Ariens 927046-056 User Manual download pdf (Page 27)

7 - 27

7.2 SPEED SELECTOR

Carrier Assembly Removal

1. Remove cotter pin attaching shift link to bellcrank

and disconnect shift link from bellcrank.

2. Remove spring from clutch shaft.

3. Remove cotter pin from one end of transfer shaft

and remove transfer shaft from frame.

4. Unhook carrier yoke from clutch shaft and remove

yoke and carrier assembly.

Disassembly of Carrier

1. Remove locknut and thrust washer from top of

spindle bolt.

2. Remove drive disc assembly from bearing housing

along with ball bearings and sleeve bushing.

3. Remove two flange whizlock screws attaching

yoke to carrier and remove yoke.

4. Remove two flange whizlock screws attaching

bearing housing to carrier and remove bearing

housing.

5. Remove shim washer from spindle bolt.

6. Remove four flange whizlock screws securing disc

adapter to drive disc and remove adapter and

spindle bolt.

7. Inspect all parts for wear or damage and replace

as necessary.

8. Assemble in reverse order.

NOTE:

Center lock nut at top of assembly must be

torqued to 45 ft-lbs (61 Nm).

Figure 26

1. Flange Bushing

2. Transfer Shaft

3. Sleeve Bushing

4. Drive Plate Carrier

5. Carrier Yoke

6. Neutral Stop

7. Ball Bearing

8. Sleeve Bushing

9. Radial Bearing

10.Drive Disc Adaptor

11.Spindle Bolt

12.Drive Disc

13.Shift Link

14.Bearing Housing

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 35 36

Comments to this Manuals

No comments

Ariens 927046-056 User Manual Page 27

Comments to this Manuals