Ariens 927046-056 User Manual download pdf (Page 25)

6 - 25

6.6 MOWER SPINDLE REMOVAL

To remove the spindle:

1. Remove two lock nuts securing belt finger to pivot

plate and remove belt finger.

2. Remove jam nut and lockwasher from top of

mower pulley and remove mower pulley.

3. Remove nuts, washer and spring on brake band.

4. Remove fastener from top of brake band and

remove brake band and washer.

5. Remove lock nut and washer on top of idler and

remove idler along with bearing spacer and

washers.

6. Remove capscrew and belt finger from idler arm.

7. Remove idler arm and washer from pivot plate.

8. Remove jam nut and lockwasher securing blade

and blade tray to spindle and remove blade and

tray.

9. Remove retainer hub and woodruff keys from

spindle shaft along with bearing slinger.

10.Remove capscrews holding spindle housing to

mower pan and remove spindle housing.

11.Press shaft out of spindle housing and remove

bearings inside housing.

12.Inspect all parts for wear or damage and replace

as necessary.

13.Assemble using reverse order.

IMPORTANT:

Jam nuts on both ends of spindle shaft

should be torqued to 50 - 55 ft-lbs (37 - 40 Nm).

Figure 24

1. Mower Pulley

2. Belt Finger

3. Plate

4. Radial Bearing

5. spindle Housing

6. Spindle Shaft

7. Bearing Slinger

8. Retainer Hub

9. Blade Tray

10.Mower Blade

11.Plate

12.Idler Arm with Brake

13.Washer

14.Bearing Spacer

15.Idler

16.Washer

17.Brake Band with Idler Arm

18.Fastener

19.Belt Finger

20.Idler

21.Idler Mount

PA0210

32" Mower

28" to 30" Mower

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 35 36

Comments to this Manuals

No comments

Ariens 927046-056 User Manual Page 25

Comments to this Manuals