Ariens SNO-THRO 932041 - ST7524E 9 User Manual download pdf (Page 19)

GB - 19

DISCHARGE CHUTE

If chute does not stay in position while operating,

tighten nut on carriage bolt at pivot point to increase

tension on spring (Figure 17).

SPEED SELECTOR ADJUSTMENT

To adjust (Figure 18):

1. Disconnect pivot pin from the speed selector arm.

Save the hardware for reinstallation.

2. Place the speed selector lever in the fastest

forward speed position.

3. Push the speed selector arm straight down

towards the ground as far as it will go.

4. Thread the adjustment pivot pin up or down the

shift rod until it aligns with the mating hole in the

speed selector arm.

5. Connect the pivot pin to the speed selector arm

with the hardware removed in step 1.

6. Check forward and reverse speeds.

a. Start unit.

b. Shift speed selector into the first forward

speed.

c. Engage the traction clutch. Unit should move

forward.

d. Stop unit.

e. Shift speed selector into the first reverse

speed.

f. Engage the traction clutch. Unit should move

backward.

g. Shut off unit.

7. Adjust pivot pin on the shift rod as needed so unit

travels forward when speed selector lever is in

first forward position and backward when speed

selector is in first reverse position.

8. Connect the pivot pin to the speed selector arm

with the hardware removed in step 1.

ATTACHMENT DRIVE BELT

REPLACEMENT

Remove Attachment Drive Belt

(Figures 19 and 20)

1. Shut off engine, remove key, disconnect spark

plug wire and allow unit to cool completely.

2. Remove two screws securing belt cover to unit

and remove belt cover.

3. Remove spring pin from chute crank and

separate (932041, 042, 141, 509, 510, 511).

4. Remove belt finger by removing cap screw

mounting belt finger to engine (Figure 20).

5. Remove attachment drive belt from engine

sheave (it may be necessary to turn engine

sheave using recoil starter handle).

1, 2

Figure 17

1.Carriage Bolt

2.Spring

DS673

OS0001

1, 2

Figure 18

1.Shift Rod

2.Pivot Pin

3.Speed Selector Arm

4.Hair Pin

OSs0195

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 29 30

Comments to this Manuals

No comments

Ariens SNO-THRO 932041 - ST7524E 9 User Manual Page 19

Comments to this Manuals

Related products and manuals for Cars Ariens SNO-THRO 932041 - ST7524E 9