Ariens Sno-Thro 921001 - ST824E User Manual download pdf (Page 8)

GB - 8

Install Discharge Chute and Discharge Chute

Crank (921002, 003, 004)

(Figure 8)

1. Grease underside of discharge chute ring (if not

already greased).

2. Remove mounting hardware from auger housing.

3. Install discharge chute over opening in the auger

housing. Finger tighten the mounting hardware

removed in step 2.

NOTE: Leave discharge chute pedestal loose to help

install the chute rod and connect it to the control

assembly.

4. Remove the cover from the gear assembly on the

discharge chute.

5. Release the lock teeth on the gear assembly with

your finger and rotate the discharge chute 90

left.

6. Remove and save the hairpin from the control

assembly underneath the control panel.

NOTE: Do not remove the pin installed on the chute

rod.

NOTE: To ensure the discharge chute follows its full

range of travel, make sure the control lever is pushed

all the way to the left before installing and pinning the

chute rod.

7. Align the holes on the end of the chute rod with

the mark on the gear assembly and slide the end

without a pin through the gear assembly, through

the hook on the chute lock cable and into the hex

hole in the control assembly.

IMPORTANT: The hook will prevent the control cable

from contacting the engine or muffler guard.

1.Handlebar

2.Wing Knobs and Bolts

3.Wing Nuts and Bolts

4. Speed Selector Lever

Figure 6

OS7032

921001

1.Wing Knobs

2.Wing Nut

3.Bolt

4. Shift Rod

5. Speed Selector Lever

Figure 7

OS7030

2, 3

921002, 003,

004

Figure 8

1.Mounting Hardware

2.Discharge Chute

3.Chute Pedestal

4.Discharge Chute

Ring

OS7040

OS7045

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 33 34

Comments to this Manuals

No comments

Ariens Sno-Thro 921001 - ST824E User Manual Page 8

Comments to this Manuals

Related products and manuals for Cars Ariens Sno-Thro 921001 - ST824E