Ariens 991074-Max Zoom 52 Specifications download pdf (Page 15)

Removing Bagger Kit

1. Lift thumb latch and remove hose from blower

assembly and bagger assembly (see figure 14 on

page 14).

2. Remove belt guard.

3. Remove V-belt from double pulley (see figure 12 on

page 14).

4. Remove blower assembly (see figure 11 on

page 13).

5. Re-install the original belt cover.

6. Install discharge chute.

7. Remove cast iron weights (see figure 4 on

page 10).

8. Remove catcher assembly (see figure 8 on

page 12).

NOTE: When removing the grass bagger, do not

disassemble the entire kit. Remove the bagger cover

assembly from the lower mount bracket. You can remove

the lower mount or keep it installed. If you remove the

lower mount, replace the original bumper on the unit.

REMOVAL

CAUTION: Deflected material may cause injury.

ALWAYS operate mower with bagger cover

closed and secured, blower assembly fastened

securely, or with chute deflector in operating

position.

CAUTION: Always install counterweights on

front axle before operating unit with bagger

attached. Always remove counterweights from

front axle when bagger is removed from the unit.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

No comments

Ariens 991074-Max Zoom 52 Specifications Page 15